Gear pump: The gear pump relies on the motor to drive the change and movement of the working volume formed by the gap between the pump cylinder and the gear to transport the liquid and maintain the whole pressure. The main composition consists of two gears, a sealing piece, a pump body, a screw rod, and two front and rear covers. When the gear rotates, the gear is disengaged from the side to form a vacuum to maintain the pressure to draw in the liquid, and to squeeze the liquid into the body. Go to the transfer line. The amount of suction is formed by the gap between the two gears. The motor is driven by the motor. The faster the motor is driven, the larger the flow rate is. The pressure at the discharge port depends entirely on the resistance at the pump outlet.

Screw pump: The screw pump relies on the tight fit of the screw and the sealing ring to ensure the high pressure state. It has the characteristics of corrosion resistance, high temperature resistance and strong impurity passage. These sealed spaces are continuously formed at the suction end of the pump and will suck the liquid in the chamber. Enclosed therein, and continuously rotated from the suction chamber through the screw to the discharge end in the axial direction of the screw, continuously discharging the liquid enclosed in the space, as if a nut is continuously pushed forward when the thread is swung, this is The basic working principle of the screw pump.

1. Adopting independent and innovative precision two-liquid suction valve, it has the characteristics of uniform glue discharge, stable rubber collection and corrosion resistance;

2. Imported original PLC controller, reliable and durable, powerful programming;

3. It can store multiple parameters at the same time, store different parameters according to different products, and use them as needed;

4. Independently create a glue-discharging system to prevent the glue from solidifying in the mixing tube and fully guarantee the stability of the equipment;

5. Independent research and development of the whole process constant temperature heating system, high safety performance, uniform heating, to ensure uniform glue;